How often testing should take place, based on legislation, ACGIH, CCOHS, & industry best practices.

Introduction to the assignment:
In the final assignment of the course students will develop an Industrial hygiene procedure based on a specific industry that will be assigned to them. The procedure will document what will be accomplished and how and will also determine the scope (what the procedure will cover or be limited to), roles and responsibilities (who will contribute to the procedure implementation), definitions to explain technical features of the procedure, and references that list legislation, industry best practices, etc. The procedure will explain things such as the type of testing that should be conducted, where, under what circumstances, and where to send samples.
For the purposes of this assignment occupational hygiene exposures to physical agents such as heat, cold, noise, vibration, and radiation (both ionizing & non-ionizing radiation) should be considered. Exposures to gases, vapours, mists, aerosols, fumes, smoke, dusts, fibres, and particulates should also be reviewed. Legislation such as Regulation 833 Control of Exposure to Chemical or Biological Substances should be reviewed, as should Material Safety Data Sheets for the substances or material under study.
The purpose of this assignment is to help students learn how to develop an industrial hygiene procedure. The maximum number of pages allowed for the assignment is eight, not including the Title Page, Table of Contents, and References. Elements of the procedure should include:
Title page
Table of Contents
Purpose (in place of an introduction) Provide an outline of why industrial hygiene testing is to be conducted, what should be sampled and the permissible exposure limit for those substances or material.
Scope For example, if reviewing industrial baking the scope of the procedure may cover heat stress, cold stress, and exposure to baking products such as… areas of a facility.
Definitions For example;
8-hour TWA limit: means the time weighted average (TWA) concentration of a substance in air which may not be exceeded over a normal 8 hour work period.
Industrial hygiene: means the science of anticipating, recognizing, evaluating, and controlling workplace conditions that may cause workers’ injury or illness.
Roles & Responsibilities For example, a plant manager (VP Operations, etc.) may be responsible for allocating time & resources to accomplish tasks such as testing. A health & safety coordinator or manager may arrange for testing or perform testing if qualified. From research list who may be involved in performing certain tasks to complete hygiene testing.
The Joint Health & Safety Committee (JHSC) may accompany those performing testing or review the results of testing. Review JHSC roles in legislation from the Ontario Occupational Health & Safety Act (OHSA). Communication to employees of the industrial hygiene procedure and testing that may be involved is vital so there is no confusion as to why its taking place (is it routine or was there an issue).
Procedures which may include;
1. The type of testing pertinent to the industry being studied & the qualifications of those involved.
2. When the testing should take place, based on ACGIH or other industry standards.

4. Where hygiene testing should typically take place within a facility, based on your research.
5. What steps should be taken to protect worker health & safety if new installations or processes are introduced, based on legislation (OHSA) or industry best practices.
6. Where exposure samples should be sent to ensure accurate results.
Communications & Survey Results Analysis which may include;
1. Who to notify of test results within an organization.
2. List what should be done with test results. What should they be compared to?
3. How long should records be retained based on legislation or best practices.
4. In the absence of legislated exposure limits list what standard should be adopted.
5. If exposure limits are exceeded list a brief overview of next steps or corrective actions.
References List the source of information gathered. Provide the title, author, publisher, edition, year of publication and city – if web site, name of the web site, the information that was accessed, the specific link in the web site and date accessed.
Research Sources:
The ACGIH, NIOSH, CCOHS, HSE, Center for Disease Control (CDC) and U.S. Department of Labor websites should be very useful to you for this assignment. NIOSH also provides a manual of analytical methods (NMAM) that lists the methodology for carrying out hygiene testing on different of substances, in case you wish to review them.
Use your preferred search engine and type in the industry under study and the words “Industrial hygiene exposure limits” or other similar words and see what you come up with.
*On another note, if you copy or cut and paste any tables from websites, or copy phrases, you must indicate where they came from as per the instructions in the Bibliography.

Are you looking for a similar paper or any other quality academic essay? Then look no further. Our research paper writing service is what you require. Our team of experienced writers is on standby to deliver to you an original paper as per your specified instructions with zero plagiarism guaranteed. This is the perfect way you can prepare your own unique academic paper and score the grades you deserve.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.